|
| |
P.T.
Enterprises
Floor
Maintenance
(Strippers
/ Finishers / Coatings)
C-0100 - DISSOLVE
- HEAVY DUTY STRIPPER (non-ammoniated}
This
product combines potent, water-based solvents and wetting
agents with a powerful alkaline
system to yield a stripper capable of removing all types
of metal interlock and zinc-free floor finishes from
all types of flooring. It is concentrated, designed
to keep the cost of maintenance to a minimum.
C-0101 - MELT DOWN - HEAVY DUTY RELIQUIFIER (MOP
& STRIP)
A
reliquifier which liquefies finish and wax in minutes
- without agitation. Very good for use with
floor machines or automatics for removing those impossible
very hard plastic floor finish
coats caused by high speed burnishing or over coating.
Designed to be used on all floors.
C-0102 - HARD SEAL SUPER HARD ACRYLIC FLOOR SEALER
A
non-flammable, anti-slip non-darkening acrylic floor sealer
that penetrates, renews and protects
all floors. Excellent as a sealer on terrazzo and concrete
floors to protect against dusting and wear.
C-0103- ROCK 16 - FLOOR FINISH
A 16% high gloss-metal link scrubbable floor finish. It
is non-darkening, non-slip and resistant to scuffing
and heavy traffic. A good product for all floors.
C-0104- STONE 18 - FLOOR FINISH
A
18% high gloss-metal link scrubbable floor finish. It
is non-darkening, non-slip, and resistant to scuffing
and heavy traffic. A good product for all floors
C-0105 - GRANITE 25 - FLOOR FINISH SEALER
A
thermal plastic, super high gloss premium quality floor
finish & sealer. Reduces labor & money
costs with its' built-in sealer, which eliminates one
step in the floor care process. It is a detergent proof, anti-slip, mark resistant
non-darkening finish. Responds very well to high
speed burnishing and/or spray buffing. Excellent for all
floors.
C-0105M
- MARBLE 40 - FLOOR FINISH & SEALER
A
thermal plastic high shine high performance floor finish/sealer.
It has been formulated for floors
where durability & beauty are of most importance.
The built-in sealer eliminates the
need to pre-seal or undercoat. It
is very durable and resistant to detergents, scuffing,
heel marks and slipping. It is non-darkening. An
excellent product for all floors.
C-0106 - REVIVE - SPRAY BUFF
A
solution which is a non-clogging product for machine buffing.
It will clean, revitalize and restore
the shine to heavy traffic floor areas. Will also remove
black scuff marks. Very good for either trigger
spray or fixed spray apparatus.
C-0107 - RENEW - RESTORER- (thereto- plastic)
A
total maintenance formula that produces a mirror-like
image on all floors coated with thermal plastic, metal
inter-lock or polymer floor finishes. Very good for recoating,
rejuvenating and spray buffing. Also good with high buffing
machines.
C-0110 - GYM FLOOR FINISH/SEALER
Formulated
to protect and beautify gymnasium floors. Resists the
friction created by athletic play and traffic. Does not easily mar, scuff or scar. Resists
rubber burns. Also good for bowling alley lanes
& floors. Can be applied with mop or applicator.
C-0111 - POLYURETHANE FINISH/SEALER (CLEAR)
A
clear urethane finish and sealer for wood, gym floors,
concrete, brick, stone, metal mosaic and equipment. Use to coat and protect surfaces.
Beautifies and extends the life of wood surfaces.
Available in 30%, 40% and 50% solids for fast drying and
less volatile organic solvents. (Shipments in NY & NJ must
be 50% material to meet VOC requirements.
A control treatment that turns mops and cloths into dust magnets. Easy
and safe on all floors and surfaces. Removes dirt, dust and stains. Polishes as it cleans, non-oily,
non-flammable and water miscible. Good for all floors.
|
|
|
